GenSetLike
Related Doc:
package collection
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as
xs foldLeft z.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going left to right with the start value z on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x1, ..., xn are the elements of this collection or iterator.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as
xs foldRight z.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this collection or iterator,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this collection or iterator.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold and reduce. It has similar
semantics, but does not require the result to be a supertype of the
element type. It traverses the elements in different partitions
sequentially, using seqop to update the result, and then applies
combop to results from different partitions. The implementation of
this operation may operate on an arbitrary number of collection
partitions, so combop may be invoked an arbitrary number of times.
For example, one might want to process some elements and then produce
a Set. In this case, seqop would process an element and append it
to the list, while combop would concatenate two lists from different
partitions together. The initial value z would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop operator (e.g.
Nil for list concatenation or 0 for summation) and may be evaluated
more than once
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
A method that should be called from every well-designed equals method that is open to be overridden in a subclass.
A method that should be called from every well-designed equals method that is open to be overridden in a subclass. See Programming in Scala, Chapter 28 for discussion and design.
the value being probed for possible equality
true if this instance can possibly equal that, otherwise false
Counts the number of elements in the collection or iterator which satisfy a predicate.
Counts the number of elements in the collection or iterator which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
Computes the difference of this set and another set.
Computes the difference of this set and another set.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that.
Selects all elements except first n ones.
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this general collection.
a general collection consisting of all elements of this general collection except the first n ones, or else the
empty general collection, if this general collection has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest suffix of this general collection whose first element
does not satisfy the predicate p.
Selects all elements of this general collection which satisfy a predicate.
Selects all elements of this general collection which satisfy a predicate.
the predicate used to test elements.
a new general collection consisting of all elements of this general collection that satisfy the given
predicate p. Their order may not be preserved.
Selects all elements of this general collection which do not satisfy a predicate.
Selects all elements of this general collection which do not satisfy a predicate.
the predicate used to test elements.
a new general collection consisting of all elements of this general collection that do not satisfy the given
predicate p. Their order may not be preserved.
Finds the first element of the collection or iterator satisfying a predicate, if any.
Finds the first element of the collection or iterator satisfying a predicate, if any.
Note: may not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an option value containing the first element in the collection or iterator
that satisfies p, or None if none exists.
Folds the elements of this collection or iterator using the specified associative binary operator.
Folds the elements of this collection or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
a type parameter for the binary operator, a supertype of A.
a neutral element for the fold operation; may be added to the result
an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation,
0 for addition, or 1 for multiplication.)
a binary operator that must be associative
the result of applying fold operator op between all the elements and z
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going left to right with the start value z on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x1, ..., xn are the elements of this collection or iterator.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this collection or iterator.
Partitions this general collection into a map of general collections according to some discriminator function.
Partitions this general collection into a map of general collections according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new general collection.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to general collections such that the following invariant holds:
(xs groupBy f)(k) = xs filter (x => f(x) == k) That is, every key k is bound to a general collection of those elements x
for which f(x) equals k.
Selects the first element of this general collection.
Selects the first element of this general collection.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this general collection.
NoSuchElementException if the general collection is empty.
Optionally selects the first element.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this general collection if it is nonempty,
None if it is empty.
Selects all elements except the last.
Selects all elements except the last.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general collection consisting of all elements of this general collection except the last one.
UnsupportedOperationException if the general collection is empty.
Tests whether the collection or iterator is empty.
Tests whether the collection or iterator is empty.
true if the collection or iterator contains no elements, false otherwise.
Tests whether this general collection can be repeatedly traversed.
Tests whether this general collection can be repeatedly traversed.
true
Selects the last element.
Selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The last element of this general collection.
NoSuchElementException If the general collection is empty.
Optionally selects the last element.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this general collection$ if it is nonempty,
None if it is empty.
Displays all elements of this collection or iterator in a string.
Displays all elements of this collection or iterator in a string.
a string representation of this collection or iterator. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this collection or iterator follow each other without any
separator string.
Displays all elements of this collection or iterator in a string using a separator string.
Displays all elements of this collection or iterator in a string using a separator string.
the separator string.
a string representation of this collection or iterator. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this collection or iterator are separated by the string sep.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this collection or iterator in a string using start, end, and separator strings.
Displays all elements of this collection or iterator in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this collection or iterator. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method
toString) of all elements of this collection or iterator are separated by
the string sep.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Tests whether the collection or iterator is not empty.
Tests whether the collection or iterator is not empty.
true if the collection or iterator contains at least one element, false otherwise.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this general collection in two general collections according to a predicate.
Partitions this general collection in two general collections according to a predicate.
the predicate on which to partition.
a pair of general collections: the first general collection consists of all elements that
satisfy the predicate p and the second general collection consists of all elements
that don't. The relative order of the elements in the resulting general collections
may not be preserved.
Reduces the elements of this collection or iterator using the specified associative binary operator.
Reduces the elements of this collection or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
The result of applying reduce operator op between all the elements if the collection or iterator is nonempty.
UnsupportedOperationException
if this collection or iterator is empty.
Optionally applies a binary operator to all elements of this collection or iterator, going left to right.
Optionally applies a binary operator to all elements of this collection or iterator, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) if this collection or iterator is nonempty,
None otherwise.
Reduces the elements of this collection or iterator, if any, using the specified associative binary operator.
Reduces the elements of this collection or iterator, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
An option value containing result of applying reduce operator op between all
the elements if the collection is nonempty, and None otherwise.
Applies a binary operator to all elements of this collection or iterator, going right to left.
Applies a binary operator to all elements of this collection or iterator, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...)) where x1, ..., xn are the elements of this collection or iterator.
UnsupportedOperationException if this collection or iterator is empty.
Optionally applies a binary operator to all elements of this collection or iterator, going right to left.
Optionally applies a binary operator to all elements of this collection or iterator, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) if this collection or iterator is nonempty,
None otherwise.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new general collection containing the prefix scan of the elements in this general collection
Produces a collection containing cumulative results of applying the operator going left to right.
Produces a collection containing cumulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left.
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.
The size of this general collection.
The size of this general collection.
Note: will not terminate for infinite-sized collections.
the number of elements in this general collection.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x which satisfy the invariant:
from <= indexOf(x) < until
Note: might return different results for different runs, unless the underlying collection type is ordered.
the lowest index to include from this general collection.
the lowest index to EXCLUDE from this general collection.
a general collection containing the elements greater than or equal to
index from extending up to (but not including) index until
of this general collection.
Splits this general collection into a prefix/suffix pair according to a predicate.
Splits this general collection into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the
predicate p does not cause any side-effects.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the test predicate
a pair consisting of the longest prefix of this general collection whose
elements all satisfy p, and the rest of this general collection.
Splits this general collection into two at a given position.
Splits this general collection into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of general collections consisting of the first n
elements of this general collection, and the other elements.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString
applied to this general collection. By default the string prefix is the
simple name of the collection class general collection.
Selects all elements except the first.
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general collection consisting of all elements of this general collection except the first one.
UnsupportedOperationException if the general collection is empty.
Selects first n elements.
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take from this general collection.
a general collection consisting only of the first n elements of this general collection,
or else the whole general collection, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest prefix of this general collection whose elements all satisfy
the predicate p.
Uses the contents of this collection or iterator to create a new mutable buffer.
Uses the contents of this collection or iterator to create a new mutable buffer.
Note: will not terminate for infinite-sized collections.
a buffer containing all elements of this collection or iterator.
Converts this collection or iterator to an indexed sequence.
Converts this collection or iterator to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this collection or iterator.
Converts this collection or iterator to an iterable collection.
Converts this collection or iterator to an iterable collection. Note that
the choice of target Iterable is lazy in this default implementation
as this TraversableOnce may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
Note: will not terminate for infinite-sized collections.
an Iterable containing all elements of this collection or iterator.
Returns an Iterator over the elements in this collection or iterator.
Returns an Iterator over the elements in this collection or iterator. Will return the same Iterator if this instance is already an Iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this collection or iterator.
Converts this collection or iterator to a list.
Converts this collection or iterator to a list.
Note: will not terminate for infinite-sized collections.
a list containing all elements of this collection or iterator.
Converts this collection or iterator to a sequence.
Converts this collection or iterator to a sequence. As with toIterable, it's lazy
in this default implementation, as this TraversableOnce may be
lazy and unevaluated.
Note: will not terminate for infinite-sized collections.
a sequence containing all elements of this collection or iterator.
Converts this collection or iterator to a set.
Converts this collection or iterator to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this collection or iterator.
Converts this collection or iterator to a stream.
Converts this collection or iterator to a stream.
a stream containing all elements of this collection or iterator.
Converts this collection or iterator to an unspecified Traversable.
Converts this collection or iterator to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this collection or iterator.
Converts this collection or iterator to a Vector.
Converts this collection or iterator to a Vector.
Note: will not terminate for infinite-sized collections.
a vector containing all elements of this collection or iterator.
Computes the union between of set and another set.
Computes the union between of set and another set.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that.
Test two objects for inequality.
Test two objects for inequality.
true if !(this == that), false otherwise.
Equivalent to x.hashCode except for boxed numeric types and null.
Equivalent to x.hashCode except for boxed numeric types and null.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
For null returns a hashcode where null.hashCode throws a
NullPointerException.
a hash value consistent with ==
Computes the intersection between this set and another set.
Computes the intersection between this set and another set.
Note: Same as intersect.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that.
The difference of this set and another set.
The difference of this set and another set.
Note: Same as diff.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that.
[use case] Returns a new general set containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new general set containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the general set is the most specific superclass encompassing the element types of the two operands.
Example:
scala> val a = List(1) a: List[Int] = List(1) scala> val b = List(2) b: List[Int] = List(2) scala> val c = a ++ b c: List[Int] = List(1, 2) scala> val d = List('a') d: List[Char] = List(a) scala> val e = c ++ d e: List[AnyVal] = List(1, 2, a)
the element type of the returned collection.
the traversable to append.
a new general set which contains all elements of this general set
followed by all elements of that.
The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).
The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).
the object to compare against this object for equality.
true if the receiver object is equivalent to the argument; false otherwise.
Composes two instances of Function1 in a new Function1, with this function applied first.
Composes two instances of Function1 in a new Function1, with this function applied first.
the result type of function g
a function R => A
a new function f such that f(x) == g(apply(x))
Tests if some element is contained in this set.
Tests if some element is contained in this set.
This method is equivalent to contains. It allows sets to be interpreted as predicates.
the element to test for membership.
true if elem is contained in this set, false otherwise.
Cast the receiver object to be of type T0.
Cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at
runtime, while the expression List(1).asInstanceOf[List[String]] will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
ClassCastException if the receiver object is not an instance of the erasure of type T0.
Create a copy of the receiver object.
[use case] Builds a new collection by applying a partial function to all elements of this general set on which the function is defined.
Builds a new collection by applying a partial function to all elements of this general set on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the general set.
a new general set resulting from applying the given partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Composes two instances of Function1 in a new Function1, with this function applied last.
Composes two instances of Function1 in a new Function1, with this function applied last.
the type to which function g can be applied
a function A => T1
a new function f such that f(x) == apply(g(x))
[use case] Copies values of this general set to an array.
Copies values of this general set to an array.
Fills the given array xs with values of this general set, beginning at index start.
Copying will stop once either the end of the current general set is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
the starting index.
[use case] Copies values of this general set to an array.
Copies values of this general set to an array.
Fills the given array xs with values of this general set.
Copying will stop once either the end of the current general set is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
Tests whether the argument (arg0) is a reference to the receiver object (this).
Tests whether the argument (arg0) is a reference to the receiver object (this).
The eq method implements an equivalence relation on
non-null instances of AnyRef, and has three additional properties:
x and y of type AnyRef, multiple invocations of
x.eq(y) consistently returns true or consistently returns false.x of type AnyRef, x.eq(null) and null.eq(x) returns false.null.eq(null) returns true. When overriding the equals or hashCode methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they
should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).
true if the argument is a reference to the receiver object; false otherwise.
Compares this set with another object for equality.
Compares this set with another object for equality.
Note: This operation contains an unchecked cast: if that
is a set, it will assume with an unchecked cast
that it has the same element type as this set.
Any subsequent ClassCastException is treated as a false result.
the other object
true if that is a set which contains the same elements
as this set.
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize method is invoked, as
well as the interaction between finalize and non-local returns
and exceptions, are all platform dependent.
[use case] Builds a new collection by applying a function to all elements of this general set and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this general set and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of general set. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new general set resulting from applying the given collection-valued function
f to each element of this general set and concatenating the results.
[use case] Applies a function f to all elements of this general set.
Applies a function f to all elements of this general set.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Returns string formatted according to given format string.
Returns string formatted according to given format string.
Format strings are as for String.format
(@see java.lang.String.format).
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
not specified by SLS as a member of AnyRef
The hashCode method for reference types.
The hashCode method for reference types. See hashCode in scala.Any.
the hash code value for this object.
Computes the intersection between this set and another set.
Computes the intersection between this set and another set.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that.
Test whether the dynamic type of the receiver object is T0.
Test whether the dynamic type of the receiver object is T0.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String] will return false, while the
expression List(1).isInstanceOf[List[String]] will return true.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true if the receiver object is an instance of erasure of type T0; false otherwise.
[use case] Builds a new collection by applying a function to all elements of this general set.
Builds a new collection by applying a function to all elements of this general set.
the element type of the returned collection.
the function to apply to each element.
a new general set resulting from applying the given function
f to each element of this general set and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this general set.
[use case] Finds the first element which yields the largest value measured by function f.
Finds the first element which yields the largest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this general set with the largest value measured by function f.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this general set
[use case] Finds the first element which yields the smallest value measured by function f.
Finds the first element which yields the smallest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this general set with the smallest value measured by function f.
Equivalent to !(this eq that).
Equivalent to !(this eq that).
true if the argument is not a reference to the receiver object; false otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray or mutable.ParHashMap) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this general set of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the general set and as result type of product.
Examples of such types are: Long, Float, Double, BigInt.
[use case] Checks if the other iterable collection contains the same elements in the same order as this general set.
Checks if the other iterable collection contains the same elements in the same order as this general set.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Note: will not terminate for infinite-sized collections.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Tests whether this set is a subset of another set.
Tests whether this set is a subset of another set.
the set to test.
true if this set is a subset of that, i.e. if
every element of this set is also an element of that.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this general set of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the general set and as result type of sum.
Examples of such types are: Long, Float, Double, BigInt.
[use case] Converts this general set into another by copying all elements.
Converts this general set into another by copying all elements.
Note: will not terminate for infinite-sized collections.
The collection type to build.
a new collection containing all elements of this general set.
[use case] Converts this general set to an array.
Converts this general set to an array.
Note: will not terminate for infinite-sized collections.
an array containing all elements of this general set.
An ClassTag must be available for the element type of this general set.
[use case] Converts this general set to a map.
Converts this general set to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
Note: will not terminate for infinite-sized collections.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U) of this general set.
Creates a String representation of this object.
[use case] Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs.
Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new general set containing pairs consisting of
corresponding elements of this general set and that. The length
of the returned collection is the minimum of the lengths of this general set and that.
[use case] Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs.
Returns a general set formed from this general set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this general set is shorter than that.
the element to be used to fill up the result if that is shorter than this general set.
a new general set containing pairs consisting of
corresponding elements of this general set and that. The length
of the returned collection is the maximum of the lengths of this general set and that.
If this general set is shorter than that, thisElem values are used to pad the result.
If that is shorter than this general set, thatElem values are used to pad the result.
[use case] Zips this general set with its indices.
Zips this general set with its indices.
Note: might return different results for different runs, unless the underlying collection type is ordered.
A new general set containing pairs consisting of all elements of this
general set paired with their index. Indices start at 0.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Computes the union between this set and another set.
Computes the union between this set and another set.
Note: Same as union.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that.
(genSetLike: any2stringadd[GenSetLike[A, Repr]]).+(other)
A template trait for sets which may possibly have their operations implemented in parallel.